H-Chemrease
H-Chemrease
It forms a thin, uniform, protective coating around the fibre to lower the surrace frict ion, thus minimizing the formation or durable creases
during high-temperature wet processing or polyester. It is suitable for batch process.
Key Features & Benefits
Key Features | Benefits |
Concentrated | Economical |
Versatile | Suitable for pretreatment, dyeing of cotton, polyester and their blends |
Highly efficient | Prevents chaffing or crease marks during processing |
Prevents metal-to-fiber friction Uniform dyeing in combination with phthalocyanine types of dye.
General Characteristics
Physical appearance | White colour liquid form |
Ionic nature | Anionic |
pH of 1% solution | 7.5 +/- 1 |
Miscibility | Soluble in water with vigorous stirring or soaking overnight |
Compatibility | Compatible with nonionic and anionic products |
Application:
Exhaust application :
Depending upon the fabric type i.e.construction, weave pattern, and fabric weight, 0.2-0.5 g/l of diluted Anticrease is recommended.
Note :
Fill the water in the machine. Add Celldet-R followed by the addition of Anticrease . Load fabric at 50 rpm speed (30% rpm of original rpm of the running batch). Run for 10 minutes (3 cycles) and then add bleaching auxiliaries.
It is advisable to use Anticrease at a maximum temperature of 99 deg.C and not beyond.
Instructions For Dilution :
- The best method for Dilution
- Soak Anticrease in DM water for 12-16 hrs
After 12-16 hrs, stir the soaked Anticrease at a very low rpm (50-100 rpm) OR hand stirring for homogenization. Filter/strain finished product through 200-250 mesh nylon filter cloth to remove un-dissolved particles/lumps if any.
- Quick Method for Dilution
- Take 98.5 parts DM water (60-70 deg. q
- To this, add 1.5 parts of Anticrease under constant stirring at 150-200 rpm.
Add the required quantity of Anticrease slowly over a period of 45-60 min. Continue stirring by maintaining the temperature for additional 90 minutes. Allow to age for 2-3 hours.
Filter the solution to remove un-dissolved particles/lumps if any.
It is advisable to utilize the diluted product within 2 months. Stir well before use.
Preservation:
It is recommended to add 0.1% Bronopol (2-Bromo,2-nitropropane, 1,3-diol) or Methyl Paraben (methyl para hydroxy benzoate) as an antimicrobial agent to avoid fungal/microbial growth.
Precautions
Storage: Store in a cool, ventilated shed away from heat and direct sunlight. Storage temperature should not exceed 35 deg C. Close lids firmly to avoid contact with air and moisture.
Shelf Life: 9 months from the date of manufacturing, if stored under controlled conditions.
